​​1704 Kennedy Point Suite 1124| Oviedo, FL. 32765 | Office: (407) 542-3971 | Fax: (407) 542-0025 sales@levil.com

4" 3 jaw chuck

  • Self centering: 0.003" TIR
  • Chuck size: 4"
  • Tool Material: Semi-steel body
  • Thru Hole: 0.87"

machine stand 

  • 5 drawers
  • Dimensions: 28" W x 25" D x 34 1/2" H
  • ​Weight: 158 lbs.

Clamp your part with high accuracy by using this self centering chuck.

Provides a base for the machine while allowing you to hold up to 1000 lbs. of tools and equipment to meet serious storage demands.

  • Type ER-16 for RC-73 ATC and LS-20 (0.5-10mm, 1/32-3/8")


  • Type ER-25 for RS-73                              (0.5-16mm, 1/32-5/8")

Standard clamping system widely used for machining applications.

4th axis

door interlock

  • 10 mA at 24 V

Add a magnetic door sensor as a measure of safety. When the door is open, the machine is only allowed to perform certain operations.

  • Item
  • Repeatability
  • Pretravel distance
  • Contact life time
  • Travel distance
  • Contact force
  • Standard cable length
  • Over travel dist.
  • Protective​

BTF2 Tool legth sensor

≒ 0
2 Millions
Cable 3M/ protect house 2.5M
≒ 6mm

Automatically measure the height of all your tools to lessen set up time and increase precision.

Touch probe

  • Interchangeable components for edge sensing or 3D printing.
  • 3/8" shank mounting and 2mm ruby tip probe stylus for digitizing.
  • NC contacts, shielded 5' cable.

Used to find the edges or center of parts with ease. This accessory is also crucial when digitizing surfaces in 3D. The output file can be easily translated into .DXF, .NC format or Point Cloud for reverse engineering purposes.

  • Flat base and hardened, precision ground flat sensing head for tool length measurement
  • Certified repeatability of less than 0.001"
  • NC contacts, shielded 5' cable.

Tool length sensor




  • Touch-screen desktop
  • Laptop Computer
  • Includes 60 day free trial of SmartCAM Software

For fast processing speed when generating complex tool paths and easy control of the machine from the same computer.

  • Positioning: 0.08 deg.
  • Resolution: 0.001 deg.
  • Repeatability: 0.01 deg.
  • Rapid Feed: 19 rpm

Take advantage of using a fourth axis that allows rotation and milling of a part on the same setup.

Tool holders add more flexibility to your system by giving you the ability to perform various milling operations without stopping production

  • For LS-20 spindle: S20T
  • For RC-73 ATC spindle: ISO-20

Tool holders

Copyright © Levil Technology Corp.. All rights reserved.